MK2 escort

This 1980 Mk2 Escort Sedan has gone through a full rebuild / Restoration process. • The car has had a bare metal respray after all the rust was removed. • Clean engine bay with custom features including a custom oil catch can . • Heavily work 1600 xflow on dellorto sidedrafts • Scratch-built pedal box assembly was fabricated with built-in master cylinders and a bias bar for adjustable braking. • A remote brake booster was mounted inside the front guard. • Rebuilt heater box and fan resistor. • Full 2" stainless exhaust system • Battery located in the boot and custom tool tray
CHRYSLER LIMO REAR GUARD REPAIR

SS Jaguar

1936 SS Jaguar. Extensive metal work has been involved with this project. • Roof skin replacement with a Chevy sedan roof and new fabricated A-pillars • Fabrication of a new rear floor pan • Rear inner wheel tubs • Boot shut gutter • Custom steel doors, Frames and skins • Major guard re-working This SS Jag is a very tasteful concept and has been an exciting build to be involved in. Please note, this work was carried out at Deluxe Speed & Custom.

1904 L'Etoile

• A set of new steel guards have been fabricated for this French built veteran, and a louverd steel and brass bonnet .theag me to add paragraph to your block, write your own text and edit me.

Valiant regal

What started with a couple of inner and outer rear 1/4 panel replacements quickly turned into a full bare metal rotisserie panel job. • Rust was cut out and replaced from both sills • Lower front guards replaced • Both outer cowl panel corners were replaced from where the bonnet had previously blown up and damaged them. • A modified rear valance panel was the best way to tie in and disguise the widened spare wheel tub from behind. • An unwanted sunroof was patched up with a panel shaped on the English wheel. • A tidy engine bay was the aim with all the unneeded holes welded up. Please note, this work was carried out at Deluxe Speed & Custom.

Aluminium Motorcyle tank


1910 Hupmobile Bonnet

1932 ford tudor floor pan

Rustic bifolding shed doors

59 ranchero spare wheel tub

Experience

1959 pontiac bonneville

This Pontiac went under the knife for some major rust repairs. • The rear parcel tray and catwalk panels were heavily rusted out and had an extensive rebuild. • Both rear 1/4 panels inner and outer were replaced • A full boot floor replacement was fabricated and welded in, including the underside stiffeners. • All 4 doors had lower skins replaced and interior frames cleaned up and patched where needed.• The car has also had repairs to both sills inner and outer, rear dog leg sections and floor pans. Please note, this work was carried out at Deluxe Speed & Custom.

1914 Chevrolet royal mail

• A full set of steel gaurds were fabricated for this old Chevy as well as side valance panels and a new skin on the seat and rear tray.

a metal gift card

Steel and macrocarpa gate

HR Metal Fabrication
ADRESS Unit 3/29 Kairua Road, Hornby Christchurch 8025
OPENING HOURS Mon-Fri 8 am - 4:30 pm
contact us
EMAIL hayden@hrmetalfab.co.nz